8:00 am - 5:00 pm Mon-Fri
1361 South Highway 40
Heber City Utah 84032
Phone (435) 657-3544
Welcome to the Wasatch County Emergency Management web site. This site contains information and resources related to disasters and emergency preparedness. Here you will find:
Reduction in fire danger indices and improved weather conditions have resulted in reduced wildfire hazard. As a result, all fire restrictions set in place on Friday, July 7, 2017, within the areas described below are rescinded beginning Wednesday, August 23, 2017, at 0001 hours.
This order does not affect private lands within incorporated towns or city limits.
The Utah State Forester along with Wasatch County has determined that a firework restriction is warranted in order to prevent wild fires from occurring. All of the unincorporated areas of Wasatch County have a no fireworks order in place effective July 7, 2017 11:00 pm.
Attached are maps that show were fireworks will be permitted. We ask that you please adhere to this restriction to make sure we prevent wildfires and damage to our beautiful County.
Sign Up for Emergency Notifications Link
There are areas of Wasatch County that are subject to periodic inundation which may result in loss of life and property, health hazards, disruptions of commerce and governmental services, extraordinary public expenditures for flood protection and relief, and impairment of the tax base, all of which adversely affect the public health, safety and general welfare. Residents that live near river, canals, creeks, etc. may be in a Special Flood Hazard Area (SFHA) as delineated by the Federal Emergency Management Agency (FEMA). We use the Flood Hazard Map prepared by FEMA to assist in managing development within the designated flood plains and dispense information to the public based on the FEMA flood hazard maps. Maps last updated in 2011.
When developing, it is always a good idea to check for flood hazards first. This page will give you the tools to do that.
At the bottom of this page, PDF files of each panel are provided for download.
The Flood Mapping application has been discontinued. The flood data is now included in the Base Map application under the water hazards layer. This layer is not on by default, you will have to turn it on by using the layer list button. This layer is scale dependent, as you zoom in on an area of interest, the water hazards layer will become active. If you are interested in printing a map, use the print button that is part of the map application.
Flood Hazard Map Index Map